| Item |
Description |
Details |
Quantity |
 |
X-Loupe i9 Starter Pack:
Canon IXUS 75 met 60x objectief lens |
X-Loupe battery module incl. battery
X-Loupe 60X lens with build-in dimmable illumination
Canon IXUS modified with adapter ring for X-Loupe
32 MB SD Card
Latex contact rings
Calibration Labels (2 sheets with 30 labels)
Battery charger
English manuals |
|
 |
X-Loupe iSERIES 60X lens |
X-Loupe iSERIES 60X lens |
|
 |
X-Loupe iSERIES 100X lens |
X-Loupe iSERIES 100X lens |
|
 |
X-Loupe iSERIES 150X lens |
X-Loupe iSERIES 150X lens |
|
 |
X-Loupe i9 Pro Pack: 60X100X150X & Canon IXUS 75 |
X-Loupe battery module incl. battery
X-Loupe 60X lens with build-in dimmable illumination
X-Loupe 100X lens with build-in dimmable illumination
X-Loupe 150X lens with build-in dimmable illumination
Canon IXUS modified with adapter ring for X-Loupe
Latex contact rings
Calibration Labels (2 sheets with 30 labels)
32 MB SD Card
Battery charger
English manuals |
|
| |
A60x Lens UV-LEDs, Ultraviolet illumination |
A60x Lens UV-LEDs, Ultraviolet illumination |
|
 |
A100x Lens UV-LEDs, Ultraviolet illumination |
A100x Lens UV-LEDs, Ultraviolet illumination |
|
| |
A150x Lens UV-LEDs, Ultraviolet illumination |
A150x Lens UV-LEDs, Ultraviolet illumination |
|
 |
Battery, NB-4L Li-ion |
Battery, NB-4L Li-ion |
|
 |
Bag for X-Loupe |
Outer fabric: Polyester
Dimensions (WxDxH): 21 x 10 x 13 cm.
Shoulder strap included
Prepared for waist belt carriage
Contains 9 compartments hereof 5 with zippers - ideal for charger, USB-cable, lenses and SD-cards |
|
 |
SD card 1 Gb |
Kingston Secure Digital 1 GB |
|
 |
NKSTech X-Loupe software (download via Internet) |
Annotation of images
Measurement of distance, angle, area etc.
Extended Focus based on more images
Export of measurements and image to Excel |
|
 |
Latex contact rings |
Latex contact rings |
|
 |
Calabration Label (sheet with 30 labels) |
Transparent sticker (12x19 mm) with a 5mm ruler at the top edge of the label. The label is ideal for calibration of individual images or lenses together with the X-Loupe Image Management software. The Calibration Label is attached to the object before taking an image of the object. The 5 mm ruler then becomes a part of the image and can be used for calibration. The label is easy to remove from the object again. |
|
 |
Stand for X-loupe |
Ideal for shooting repeating images with the same setup
Ideal for shooting images with different focus of the same object
Ideal for shooting images with different focus as base for an Extended Focus image created by the X-Loupe Image Management software
Dimensions (WxDxH): 20 x 18 x 19 cm
Weight: 1.4 kg
Base plate material: Iron
The X-Loupe can be mounted on the opposite side so it can shoot images of the surface outside the base plate. |
|
 |
NKSTech X-Loupe endoscope adapter ring |
The "Endoscope adapter ring" enables you to use the X-Loupe together with a fiber endoscope. Thereby you can capture still images or video sequences of your endoscope observations.
Requirements:
Minimum X-Loupe i9 Starter Pack 60X & Canon IXUS 75
Endoscope, e.g. ProVision, Testo or similar |
|
 |
X-Loupe iSERIES battery module |
X-Loupe iSERIES battery module |
|
 |
X-Loupe i9 Canon IXUS 75 modified with adapter ring |
Note: Image at the right shows the earlier version "X-Loupe i7 Canon IXUS 60 modified with adapter ring" and not the present "X-Loupe i9 Canon IXUS 75 modified with adapter ring" |
|
 |
Industrial fiber endoscope |
Industrial fiber endoscope |
|
 |
X-Loupe G20 Pack
|
X-Loupe battery module including 4 quadrant illumination control
X-Loupe G-60X lens with build-in dimmable illumination
X-Loupe G-150X lens with build-in dimmable illumination
X-Loupe G-300X lens with build-in dimmable illumination
Canon IXUS camera
Rubber contact rings
Calibration Labels (2 sheets with 30 labels)
1 GB and a 32 MB SD Card
2 Batteries, NB-5L Li-ion
Battery charger
Carrying case
English manuals
| |
| |
Contact ring; 5.0 mmThis hard plastic contact ring is an option that can be used instead of the standard latex contact ring |
Bigger outer diameter that insures easier parallel alignment to flat surfaces. On vertical surfaces the X-Loupe stands without being supported.
Fixed distances to surfaces because the hard material can not be compressed.
The contact ring is clicked onto the front of the X-Loupe lenses.
Specifications:
Securing the following distance from the front of X-Loupe lens to surface: 5.0 mm
Outer diameter: 44 mm
Material: Black Polyoxymethylene (POM) |
|
